You are going to learn all the important things regarding the Epson Workforce WF-3640 wireless setup. It is going to give you the proper context to help you proceed to carry out the setup.

Now, Epson is one of the most premier brands when it comes to devices like printers and scanners. No matter what kind of input or output task that you might need to carry out with this, you can rest assured that the device will be doing a great job at that.

But for all of that to happen properly, you will need to take care and carry out the setup properly. So, read further and find out how to install Epson Workforce WF-3640 and after that set it up for peak performance.

Why you Might Need to Carry Out the Epson Workforce WF-3640 Wireless Setup
In this section, have a look at the reasons why you should carry out the Epson Workforce WF-3640 setup process. The primary reason for you to carry out this setup process and any others for that matter is the proper configuration of all the different functional parameters of this printer.

Doing that, it is going to be very easy for you to use each and every one of the different features. Without proper configuration and calibration of each, things can get really complicated.

But not if you take time to set the device up, right as you purchase it. And by the same token, doing this is going to ensure that you face minimum technical glitches down the line.

One problem that a lot of users have reported is the problem of the different features conflicting. These can become acute especially when the task load on the device goes up. But there has not been any sort of prior calibration.

So, with these reasons in mind, let us go ahead and check out how to setup Epson Workforce WF-3640.

How to Perform the Epson Workforce WF-3640 Wireless Setup
Check out in this section, the different steps that you are going to need for this setup process. We are going to be carrying out this setup from the control panel of the printer itself. So, things are going to be rather simple.

Plug the printer to a source of power and then switch it on from there.
Go to the control panel which is going to be in the form of a screen on the body of the printer.
Over there, look for the Home icon and select it from there. Then, select the WiFi icon which you will find on the upper right side of the control panel screen.
Now, look for the WiFi Setup option and from underneath that, select the WiFi Setup Wizard option.
You will now get to see all the different wireless connection points that are available nearby. Use the navigation keys to select from that list, the particular Wifi network that you want to connect to.
After you select the network, you will have to connect to it by putting in all the necessary authorization information, that includes things like username, password.
Select the Proceed option and then the OK option from there to get to the next step in the process.

From this point onwards, the driver program in the printer is going to proceed with the process. Wait for the Epson Workforce WF-3640 wireless setup process to complete. Now, as the process will come to an end, you will have to click on the Done button over there.

After this, you will have to take care of the setup from the side of the computer system. You can use the installation disc for the printer to carry out this process. Then, as you have done all of that, you will be able to use the printer properly.
To Conclude
Here, you have the complete setup process that you are going to need to get the printer working right. But it may just be the case that you have some other question or doubt regarding this.

For that, you can use the comment section down below to post your question and get the answer to that. And for articles like this, visit our website and you are going to find all tech-based articles.